packjaki.

Cheapest Custom Mailer Boxes: 9 Ways to Cut the Price

Learn what drives mailer box prices and nine practical ways to lower them without looking cheap, plus when the lowest quote costs you more in the end.

By packjaki editorial · 2026-11-09 · Guides & Resources

The cheapest custom mailer boxes are single-colour or kraft-look corrugated mailers in a standard size, ordered in larger quantities and shipped by sea. At 500 units a full-colour printed mailer of about 30 x 22 x 11 cm is indicatively around €2.25 per box, and most of the savings below come from design and quantity decisions, not from cheaper board.

This guide covers what actually drives the price of a custom mailer box, nine ways to lower it, and the point where chasing the lowest quote costs you more than it saves. All prices here are indicative figures from our own packaging cost calculator; the written quote is always the final price.

What drives the price of a mailer box

A mailer box is a die-cut sheet of corrugated board, printed, folded and glued. Its cost is built from a handful of things, roughly in this order of importance:

  • Size. Board is bought and priced by area. A larger box uses more board, fits fewer boxes on a sheet and costs more to freight.
  • Quantity. Set-up costs (cutting die, printing plates, machine make-ready) are spread over the run. Per-box price falls roughly 15 to 20 percent at 1,000 units compared with 500, and towards half at 5,000.
  • Printing. Number of colours, ink coverage, and whether the inside is printed.
  • Board grade. E-flute, B-flute, liner quality, white-top or kraft.
  • Finishing. Lamination, varnish, foil, embossing.
  • Delivery. Door delivery adds about €0.30 to €0.40 per box depending on pallet size, and the shipping method changes this a lot.

Indicative price by size

Size is the quickest lever to understand. These are indicative per-box prices for a full-colour printed corrugated mailer at 500 units, before delivery.

Approx. size (cm) Typical use Indicative price at 500 units
30 x 15 x 11 Small apparel, accessories, bottles about €1.85
30 x 22 x 11 General e-commerce, folded clothing, gift sets about €2.25
35 x 26 x 15 Larger sets, shoes, bulkier items about €2.65

Prices are indicative and depend on artwork, finish and board. The step between sizes is modest, which tells you something useful: moving from the middle size to the largest costs about 40 cents, but an oversized box also raises your courier cost on every parcel. Fit matters more than the unit price.

9 ways to cut the price of custom mailer boxes

1. Choose the smallest size that fits properly

Measure the product in its final state, with tissue or a wrap, and add only the clearance needed to close the lid without bowing. Cutting 2 cm from each dimension lowers board use and, more importantly, can drop you into a cheaper courier weight or size band. Our custom box sizes guide explains how to measure.

2. Use a standard die

A common style and size ratio means the factory already has a suitable cutting die or can adapt one. A fully custom structure with unusual tuck or lock features needs new tooling and more sampling.

3. Print one side, or one colour

Printing the outside only, in one or two colours, costs clearly less than full-colour printing inside and out. A single-colour logo on kraft board is the lowest-cost branded mailer you can order, and it looks deliberate rather than cheap when the layout is clean.

4. Keep the board natural

Kraft board has no white coating or bleach layer, so it is the lowest-cost surface. If your brand works in earthy or monochrome colours, kraft with black or one Pantone ink is a good fit. We compare the options in kraft vs white vs black packaging.

5. Skip the special finish until you need it

Matt or gloss lamination, foil and embossing each add cost and production steps. A water-based varnish or no coating is cheaper. If you want a premium touch, one small foil logo is often better value than full-surface lamination. The trade-offs are covered in spot UV vs foil vs embossing.

6. Pick the right flute, not the thickest one

E-flute (around 1.5 mm) gives a smooth print surface and enough strength for most light to medium parcels. B-flute is thicker and stronger but costs more and prints slightly rougher. If the contents are under a couple of kilograms and not fragile, E-flute is normally enough. See our flute types guide.

7. Order more per design

Per-box price falls fast between 500 and 1,000 units. If you will use the box for six months or more and storage is not a problem, ordering 1,000 can lower the unit price by roughly 15 to 20 percent. The cost of unused stock is real, though, so only do this if the design is stable.

8. Combine sizes in one artwork family

If you need two sizes, keeping the same artwork logic, colours and panel layout makes prepress simpler. Be aware that MOQ is per design, so two different sizes are normally two orders of 500. Our MOQ guide explains how this works.

9. Plan the shipping method early

Sea freight is far cheaper per box than air, and mailer boxes ship flat, so a pallet carries many. The difference is time. Production plus delivery usually takes about 6 to 8 weeks, so ordering early and using sea freight is itself a saving. Door delivery to Spain and the wider EU, the UK, the US and the Middle East adds about €0.30 to €0.40 per box depending on pallet size.

Where not to cut

Some savings quietly cost more later.

  • Weak board. A mailer that arrives crushed or with a bowed lid creates refunds and bad reviews that cost far more than 20 cents saved.
  • Skipping the proof. A wrong colour or a logo too close to a fold edge cannot be fixed after production. A digital proof or a printed sample is cheap compared with 500 reprinted boxes. Order a sample if the box is going to be a long-term item.
  • Wrong fit. A box that is too tight damages products; one that is too large needs void fill and costs more to post.
  • Unclear artwork. Low-resolution files or missing dielines cause delays, and delays cost more than any discount.

When the cheapest option is a false economy

The lowest quote is a good deal if the box does its job. It becomes a false economy in a few common cases:

  • The price is low because the board is thinner than you specified, or the liner is a lower grade. Ask for the board spec in writing: flute type, paper weights and the printing method.
  • Printing quality is poor, with soft logos or colour that shifts between boxes. For a brand that depends on how it looks on unboxing, this matters.
  • The supplier is not clear about tolerances. A reasonable tolerance on size is normal; unexplained variation is not.
  • Delivery costs are left out of the quote. Compare prices on the same terms: ex-works, to port or to your door.

A simple low-cost spec to start from

If you want the lowest sensible price for a first order, a good starting point is: kraft or white-top E-flute, a standard 30 x 22 x 11 cm size, one or two colours on the outside only, no lamination, 500 or 1,000 units, shipped by sea to your door. Add one upgrade at a time, such as inside print or a foil logo, and look at what each adds to the calculator price before you commit.

FAQ

What is the minimum order for custom mailer boxes?

Our minimum is 500 units per design. Below that, set-up costs make per-box prices uncomfortably high for factory production.

Is kraft always cheaper than white?

Usually, yes, because kraft does not need a white liner or heavy ink coverage to look finished. The difference is smaller if the white box has only a small logo.

Does printing the inside cost a lot more?

It adds a printing pass and increases ink use, so yes. Many brands print the outside only and add a simple insert or tissue for a branded inside instead.

How much does delivery add?

Door delivery adds about €0.30 to €0.40 per box depending on pallet size. Sea freight is the cheaper route and takes longer.

How long does an order take?

Production plus delivery usually takes about 6 to 8 weeks. Allow extra time for artwork changes and for a sample if you need one.

Get a price for your size

Use the packaging cost calculator for an indicative price, or contact us with your product size and quantity. We offer free design help and a mockup, and the written quote is the final price.

Related guides

Request a quote · More packaging guides