Custom Boxes With No Minimum vs MOQ 500: Which Costs Less?
Compare no-minimum digital short runs with factory MOQ 500 production, with simple per-unit maths and clear guidance on when each option makes sense.
By packjaki editorial · 2026-11-09 · Insights & Trends
Custom boxes with no minimum are usually made by digital printing, which has low set-up cost and a higher price per box. Boxes at a factory MOQ, such as 500 units, use offset or flexo printing with cutting dies, which cost more to set up but give a much lower price per box. For small tests, digital short-run is cheaper overall; once you need a few hundred boxes or more, factory production wins.
Neither route is better in general. The right one depends on how many boxes you will actually use, how long you will keep the design and how much the finish matters. This guide explains how each works, the per-unit maths, and when each makes sense. Our figures are indicative from the packjaki calculator and the written quote is final.
Why minimums exist
A custom box has costs that do not depend on quantity. These are paid once per design:
- Artwork and prepress. Checking files, applying the dieline, colour separation and proofing.
- Cutting die. A shaped steel rule die for cutting and creasing the box. A new die is a fixed cost.
- Printing plates or set-up. For offset or flexo, plates are made per colour and the press needs make-ready sheets before it prints well.
- Machine time. Changing over a press, die-cutter and gluer takes time whether you order 50 or 5,000.
When the run is small, these fixed costs are divided over few boxes. That is why true factory prices only make sense above a certain quantity. For a longer explanation, see our MOQ guide.
How "no minimum" boxes are made
Suppliers that offer no minimum typically use one or more of these methods:
- Digital printing. The artwork is printed directly from a file with no plates. Set-up is minimal, so small runs are practical.
- Digital cutting. A flatbed cutter with a CAD file cuts boxes without a steel die. Good for prototypes and short runs.
- Stock box sizes. You choose from existing sizes and add a label, sticker or print on top.
- Plain boxes with labels, stamps or stickers. Not full custom print, but a legitimate low-quantity brand option.
The trade-offs are higher cost per box, fewer finish and board options, and sometimes less colour consistency than a factory press.
Digital short-run vs factory production
| Factor | Digital short-run (no minimum) | Factory production (MOQ 500) |
|---|---|---|
| Typical quantity | 1 to a few hundred | 500 and up |
| Set-up cost | Low | Higher, spread over the run |
| Price per box | High | Much lower at volume |
| Finish options | More limited | Lamination, foil, embossing, spot UV, inside print |
| Colour matching | Digital CMYK, limited spot colours | Pantone spot inks possible |
| Lead time | Usually shorter | About 6 to 8 weeks including delivery |
| Best for | Tests, samples, small launches | Repeat orders and growing brands |
The per-unit maths
The simplest way to compare is total cost divided by boxes you will really use. Here is a worked example using our indicative factory price.
A full-colour printed corrugated mailer of about 30 x 22 x 11 cm is indicatively around €2.25 per box at 500 units. That is about €1,125 for the run, before delivery. Door delivery adds about €0.30 to €0.40 per box depending on pallet size, so call it around €2.60 per box delivered.
Now compare with a short-run supplier. We cannot quote their prices, but the pattern is consistent: short-run unit prices are often a multiple of the factory price. To check a quote, divide the total by the number of boxes. If a 100-box digital run totals more per box than the delivered factory price above, then the break-even is simply the quantity at which the extra 400 boxes cost less than the premium you are paying per box on the small run.
- If you need 100 boxes and will never need more, short-run costs less in total even at a higher unit price.
- If you will need 500 within a year, factory production is usually cheaper per box and also cheaper in total.
- If you are unsure, a small digital run first and a factory order after demand is proven is a reasonable path.
Factory per-box price keeps falling with volume: roughly 15 to 20 percent lower at 1,000 units and towards half at 5,000. The price comparison gets more one-sided the more you order. See the custom box cost breakdown for more detail.
When no-minimum makes sense
- Testing a product. You are not yet sure the product will sell, and 500 boxes is more than you can use.
- Sampling and design checks. You want to hold the actual box before committing to production.
- Events and one-off gifts. The box has a limited use period.
- Several variants in small numbers. Different designs each in low quantity, where MOQ would multiply across designs.
When MOQ 500 makes sense
- Repeat shipping. You send the same product regularly, so boxes will be used.
- Brand finish matters. You want lamination, foil, embossing or printed inside, which short-run methods rarely offer.
- Consistent colour. You need a Pantone brand colour that is reproducible between orders.
- Unit cost matters. Your margin cannot carry a high per-box price.
- Specific board or size. You need a certain flute, strength or dimension rather than a stock size.
Note that MOQ is per design. Two different artworks or sizes usually means two orders. If you are carrying several products, plan the range so artwork sets share structure where possible.
Ways to make MOQ 500 less risky
- Order a sample first. A sample confirms size, fit and colour before the full run.
- Choose a versatile size. A box that fits several products or bundles is less likely to leave you with unused stock. See the custom box sizes guide.
- Use a neutral design. A logo-only box without dated promotional text stays useful longer.
- Store flat. Mailers and shipping boxes ship and store flat, so 500 take little space.
- Plan quantity to your sales. Count how many orders you ship per month, then choose a run that covers a few months, not years.
Hidden costs to compare
- Shipping. Short-run boxes sent by courier cost more per box than a pallet. Door delivery on a factory order adds about €0.30 to €0.40 per box depending on pallet size.
- Lead time. Factory orders take about 6 to 8 weeks including delivery; plan stock early.
- Artwork changes. Fixing mistakes is cheap before production and expensive after.
- Dieline fees. Some suppliers charge separately for dies or plates. Ask whether they are included.
FAQ
Can I order fewer than 500 custom boxes from packjaki?
Our production minimum is 500 units per design. For quantities below that, we suggest a sample first or a stock-size box with a label while you confirm demand.
Why is the per-box price so much higher on small runs?
Fixed costs such as artwork, press set-up and cutting tools are divided over fewer boxes, and digital printing is slower and more expensive per box than a factory press.
Is a sample the same as a small order?
No. A sample is made to check the design and fit before production. It is not priced like a production run.
Do digital boxes look worse?
Not necessarily. For simple designs they look fine. The limits are in finishes, spot colours and board choice rather than basic print quality.
What if I order 500 and need more later?
Reorders reuse the existing die and settings, so repeat runs are simpler. Price per box also falls at higher quantities.
Next step
If you are weighing a first order, use the packaging cost calculator to see indicative prices at 500, 1,000 and 5,000 units, or contact us with your product and expected volume. We offer free design help and a mockup, and ship worldwide with door delivery to Spain and the EU, the UK, the US and the Middle East. Prices are indicative and the written quote is final.