packjaki.

Custom Magnetic Gift Boxes: How They're Made and Priced

Learn how magnetic rigid gift boxes are built, which structures and materials to choose, and what a 500-unit order typically costs delivered to your door.

By packjaki editorial · 2026-11-09 · Guides & Resources

A custom magnetic gift box is a rigid box whose lid closes with hidden magnets instead of a ribbon, tuck or friction fit. At 500 units, a mid-size printed magnetic box (about 30×22×10 cm) typically costs roughly €3.80–5.20 per box delivered, around 1.9 times the price of a printed mailer of the same size.

What a magnetic gift box actually is

The box is built from thick greyboard, wrapped in printed or specialty paper, and finished with a small magnet in the lid and a matching magnet or steel plate in the base. When the lid closes, the magnets pull together with a soft, firm click. That sound and feel is the main reason brands choose this style: it signals care before the customer has seen the product.

Most magnetic boxes are variations of two or three structures. Knowing which one you want makes quoting far quicker, because it fixes the tooling and the hand-assembly steps.

The main magnetic box structures

Flap-over (book-style) closure

One piece with a hinged front flap that folds over and snaps shut onto the base. It is the classic magnetic gift box and the most economical, because there is no separate lid. The magnet sits in the flap and a plate or second magnet sits in the front wall. If you want the hinged opening explained in more detail, see our guide to book-style rigid boxes.

Lid-and-base with magnets

A separate lid sits over the base, with magnets in the lid rim and base wall. It looks like a traditional custom rigid box but closes more securely. It costs a little more because it needs more precise fitting.

Hinged lid with a magnetic neck

A lid joined to the base by a fabric or paper hinge, with a shoulder neck that holds a ribbon or insert. It is common for jewellery, watches and premium sets.

Collapsible magnetic box

The box ships flat and is folded up by the customer. It lowers freight volume, but the walls are slightly less rigid and the tolerances are looser. It suits large orders where shipping cost matters more than a showroom finish.

Materials and specifications that matter

  • Greyboard thickness. Typically 1.5–2.5 mm. 1.5 mm is fine for small boxes. 2.0–2.5 mm is better for large boxes and anything heavier than a few hundred grams, because thin board bows near the magnets.
  • Wrapping paper. Printed art paper in 128–157 gsm is the standard. Specialty papers (textured, soft-touch laminated, linen-embossed) give a very different feel. Heavier wrap hides board seams better.
  • Magnets. Small neodymium discs, usually 10–15 mm, are embedded between board layers and covered by the wrap. Two to four magnets are common; large boxes get more. The magnet should never be visible or loose.
  • Lining. Most boxes are lined with a printed or plain paper inside. Premium options include a coloured or printed inner paper that matches the brand.
  • Ribbon pulls. A small satin or grosgrain ribbon under the product helps the customer lift items out. It is cheap and makes the box easier to use.
  • Inserts. EVA foam, card, moulded pulp or flocked trays that hold the product. See our inserts, dividers and foam spec guide for choosing between them.

Magnetic box vs other closure types

Magnets are not always the right answer. This table compares them with the other common closures. Prices are relative to a printed mailer of the same size, based on our calculator, and are indicative only.

Closure Relative cost Feel on opening Best for Watch out for
Printed mailer (tuck flap) 1.0× Functional Subscription and e-commerce shipments Not a gift presentation
Lift-off lid rigid box about 1.6× Classic, slow reveal Gift sets, apparel, accessories Lid can slide off in transit without a sleeve or tape
Magnetic rigid gift box about 1.9× Secure, satisfying click Cosmetics, jewellery, premium gifts, corporate sets More hand work, so longer lead time
Ribbon-closure rigid box about 2.0× Ceremonial Weddings, high-end gifting Slower to pack; ribbon can crease

What drives the price

For a printed magnetic box at 500 units, the biggest cost drivers are, in order: size, board thickness, wrap and printing, finishes and insert. Larger boxes use more board and paper, and cost more to hand-wrap. The finish list is usually small compared with the base structure.

  • Hot-foil logo: roughly €0.12 per box (plus a one-off die).
  • Embossing: roughly €0.10 per box.
  • Spot UV: roughly €0.08 per box.
  • Printed insert or EVA foam: roughly €0.35 per box.

Prices fall at 1,000 units and above, because set-up and tooling are spread over more boxes. These figures are indicative only. The final price is always the written quote, which depends on your exact size, materials and artwork.

To compare finishes before committing, read spot UV vs foil stamping vs embossing.

How a magnetic gift box is made

  1. Dieline and structure. The flat pattern is drawn to your internal product dimensions, with allowance for the wrap and board thickness. The magnet pockets are placed here.
  2. Printing. The wrap sheet is offset printed (CMYK or Pantone) and laminated if specified. Foil and embossing are done next on the flat sheet.
  3. Board cutting and grooving. Greyboard is cut to size. For hinged flap boxes it is grooved so the flap folds cleanly.
  4. Magnet fitting. Magnets are fixed in place with a double layer of board or an adhesive pocket, and checked for polarity so the lid pulls closed rather than pushes open.
  5. Wrapping. The printed paper is glued to the board by machine or by hand, with corners pulled tight. Hand-wrapping is the slowest step and the one most affected by quantity.
  6. Lining and inserts. The inner paper and the insert are glued in.
  7. Inspection and packing. Boxes are checked for corner gaps, loose magnets, creases and colour match before being packed flat or assembled.

Because so many steps are done by hand, magnetic boxes usually add a week or more to a rigid-box schedule. Production plus delivery is typically about 6 to 8 weeks, and it is wise to stay near the top of that range for large or complex designs.

Common mistakes to avoid

  • Making the box too tight. Add 2–3 mm of clearance around the product. A snug fit is fine, but pressure on the walls weakens the magnet pull.
  • Using thin board on big boxes. A lid that bows when closed will not stay shut or look right.
  • Dark, flat colours without lamination. Dark matte wraps scuff in shipping. Soft-touch lamination or a protective varnish reduces visible rub marks.
  • Ignoring registration. Foil and embossing should be placed at least 5 mm from a fold or edge, because a small misregistration of about 1 mm is normal in rigid-box wrapping.
  • Skipping a sample. Magnet strength and lid feel are hard to judge from a drawing. A white or printed sample is worth the extra time on any new structure.

FAQ

Can magnets affect electronics or credit cards?

The small magnets used in gift boxes are weak at any distance, but it is sensible not to place magnetic stripe cards directly against them. For electronics, a card or foam insert that sets the product a few millimetres from the magnet is enough.

Are magnetic boxes safe for shipping?

Yes, when packed in an outer carton. A magnetic box protects the product well but is not designed to be shipped bare, because corners can crush. Most brands put the box inside a shipper carton.

Can I order a magnetic box with a window or custom insert?

Yes. Windows, moulded EVA, foam and card inserts are all possible. Each adds a hand step, so confirm the design before quoting.

Are magnetic boxes recyclable?

The board and paper are paper-based, but the magnets and foam are not. If recyclability matters, use a paper or pulp insert and ask for magnets that can be removed. See our rigid box manufacturer guide for other material choices.

What is the minimum order?

Our minimum is 500 units per design. Different sizes count as separate designs, though different artwork on the same structure can often be combined.

Getting a quote

If you are considering a magnetic box, send us your product dimensions, quantity and any finishes you want. You can get a first estimate from the packaging cost calculator, request a sample, or ask for free design help and a mockup. We manufacture directly in Guangzhou and deliver door to door to Spain and the EU, the UK, the US and the Middle East. See our custom gift boxes range or contact us for a written quote.

Related guides

Request a quote · More packaging guides